收藏本站
FUNCTIONAL DESCRIPTION
FUNCTIONAL INTERNAL BLOCK DESCRIPTION
FUNCTIONAL INTERNAL BLOCK DESCRIPTION
MC34716 - Functional Block Diagram
Internal Bias Circuits
Protection Functions
System Control and Logic
Control and
Supervisory Functions
2 x Buck Converter
Figure 7. Block Illustration
Oscillator
Tracking and Sequencing
INTERNAL BIAS CIRCUITS
This block contains all circuits that provide the necessary
supply voltages and bias currents for the internal circuitry. It
consists of:
? Internal voltage supply regulator: This regulator
supplies the V DDI voltage that is used to drive the digital/
analog internal circuits. It is equipped with a Power-On-
Reset (POR) circuit that watches for the right regulation
levels. External filtering is needed on the VDDI pin. This
block will turn off during the shutdown mode.
? Internal bandgap reference voltage: This supplies the
reference voltage to some of the internal circuitry.
? Bias circuit: This block generates the bias currents
necessary to run all of the blocks in the IC.
SYSTEM CONTROL AND LOGIC
This block is the brain of the IC where the device
processes data and reacts to it. Based on the status of the
STBY and SD pins, the system control reacts accordingly and
orders the device into the right status. It also takes inputs
from all of the monitoring/protection circuits and initiates
power up or power down commands. It communicates with
the buck converter to manage the switching operation and
protects it against any faults.
OSCILLATOR
This block generates the clock cycles necessary to run the
IC digital blocks. It also generates the buck converters
switching frequency. The switching frequency can be
PROTECTION FUNCTIONS
This block contains the following circuits:
? Over-current Limit and Short-circuit Detection: This
block monitors the output of the buck converters for
over-current conditions and short-circuit events and
alerts the system control for further command.
? Thermal limit detection: This block monitors the
temperature of the device for overheating events. If the
temperature rises above the thermal shutdown
threshold, this block will alert the system control for
further commands.
? Output over-voltage and under-voltage monitoring: This
block monitors the buck converters output voltages to
ensure they are within regulation boundaries. If not, this
block alerts the system control for further commands.
CONTROL AND SUPERVISORY FUNCTIONS
This block is used to interface with an outside host. It
contains the following circuits:
? Standby Control Input: An outside host can put the
34716 device into standby mode (S3 or Suspend-To-
RAM mode) by sending a logic “0” to the STBY pin.
? Shutdown Control Input: An outside host can put the
34716 device into shutdown mode (S5 or Suspend-To-
Disk mode) by sending a logic “0” to the SD pin.
? Power Good Output Signal: The 34716 can
communicate to an outside host that a fault has
occurred by pulling the voltage on the PG pin high
through a pull-up resistor.
programmed by connecting a resistor divider to the FREQ
pin, between VDDI and GND pins (See Figure 1 , page 1 ).
34716
Analog Integrated Circuit Device Data ?
14
Freescale Semiconductor
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
KIT34717EPEVBE KIT EVAL BOARD 5A 1.0MHZ
KS-1787-MG SHELF SLIDING KEYBOARD ASSEMBLY
KS-1788 SHELF SLIDING KEYBOARD ASSEMBLY
KSDKSTM32-PL KIT IAR KICKSTART STM32 CORTEXM3
LC4064ZC-EV BOARD EVAL FOR ISPMACH 4064ZC
LCMXO2280C-C-EVN BOARD CONTROL EVAL MACHXO
LDB100-024SW LED POWER SUPPLY 24V 0-4A 100W
LDB150-048SW LED POWER SUPPLY 24V-48V 3.125A
相关代理商/技术参数
KIT34717EPEVBE 功能描述:电源管理IC开发工具 5.0 A 1.0MHZ FULLY INTEG RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V
KIT34727FCEVBE 功能描述:电源管理IC开发工具 600MA HIGH EFFICIENCY LO RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V
KIT34825EPEVME 功能描述:界面开发工具 MICRO USB INTERFACE IC RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V
KIT34844AEPEVBE 功能描述:LED 照明开发工具 IC, 10 CHANNEL LED BACKLIGHT RoHS:否 制造商:Fairchild Semiconductor 产品:Evaluation Kits 用于:FL7732 核心: 电源电压:120V 系列: 封装:
KIT34844EPEVME 功能描述:LED 照明开发工具 MC34844 10-Ch LED BL Driver Eval Kit RoHS:否 制造商:Fairchild Semiconductor 产品:Evaluation Kits 用于:FL7732 核心: 电源电压:120V 系列: 封装:
KIT34845EPEVME 功能描述:LED 照明开发工具 IC, 6 CHANNEL LED BACKL RoHS:否 制造商:Fairchild Semiconductor 产品:Evaluation Kits 用于:FL7732 核心: 电源电压:120V 系列: 封装:
KIT34929EPEVME 功能描述:电源管理IC开发工具 1.0 A/ 28 V BRUSHLESS DC RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V
KIT3500UZ 功能描述:KIT CAP CERM HI FREQ 1210 RoHS:是 类别:套件 >> 无源 - 电容器 系列:U 标准包装:1 系列:SP-Cap CD, CX, SL, SX 套件类型:聚合物，铝电解 值:135 件 - 39µF ~ 470µF，各 15 件 包装:- 安装类型:表面贴装 包括封装:7343-17，7343-20 产品目录页面:2651 (CN2011-ZH PDF) 工具箱内容:(15) PCE4991CT-ND - CAP ALUM 220UF 4V 20% SMD(15) PCE4990CT-ND - CAP ALUM 330UF 2V 20% SMD(15) PCE4989CT-ND - CAP ALUM 150UF 6.3V 20% SMD(15) PCE4988CT-ND - CAP ALUM 150UF 6.3V 20% SMD(15) PCE4943CT-ND - CAP ALUM 39UF 10V 20% SMD(15) PCE4823CT-ND - CAP ALUM 470UF 2V 20% SMD(15) PCE4816CT-ND - CAP ALUM 220UF 4V 20% SMD(15) PCE4479CT-ND - CAP ALUM 220UF 2V 20% SMD(15) PCE4472CT-ND - CAP ALUM 120UF 2V 20% SMD 其它名称:SP4-KIT